High-Strength Alloy Shackles with Grade 8 Performance The Crosby G-209A Alloy Screw Pin Anchor Shackle combines the convenience of a screw pin connection with high-strength forged alloy construction. Engineered to meet the performance requirements of Grade 8 shackles, it provides increased Working Load Limits for demanding lifting and rigging applications. Each G-209A shackle is forged from alloy
$ 236.000
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
The Crosby G-209A Alloy Screw Pin Anchor Shackle combines the convenience of a screw pin connection with high-strength forged alloy construction. Engineered to meet the performance requirements of Grade 8 shackles, it provides increased Working Load Limits for demanding lifting and rigging applications.
Each G-209A shackle is forged from alloy steel, quenched and tempered, and fitted with an alloy screw pin. The Working Load Limit is permanently marked on every shackle, and the galvanized finish helps resist corrosion in demanding industrial environments. Crosby’s distinctive Red Pin® provides an easily recognized mark of genuine Crosby quality.
The Crosby G-209A is commonly used to connect wire rope, alloy chain, synthetic slings and other rigging components in crane, construction, manufacturing, marine and general material handling applications. Its higher Working Load Limits make it a strong choice where the convenience of a screw pin anchor shackle is preferred but greater capacity is needed.
| Stock No. | Nominal Size (in) | Working Load Limit (ton) | Pin Diameter (in) | Throat Opening (in) | Weight (lb) | Replacement Screw Pin |
|---|---|---|---|---|---|---|
| 1017450 | 3/8 | 2 | 0.44 | 0.66 | 0.31 | — |
| 1017472 | 7/16 | 2.67 | 0.50 | 0.75 | 0.38 | — |
| 1017494 | 1/2 | 3.33 | 0.63 | 0.81 | 0.63 | — |
| 1017516 | 5/8 | 5 | 0.75 | 1.06 | 1.38 | — |
| 1017538 | 3/4 | 7 | 0.88 | 1.25 | 2.35 | — |
| 1017560 | 7/8 | 9.5 | 1.00 | 1.44 | 3.61 | — |
| 1017582 | 1 | 12.5 | 1.16 | 1.69 | 5.32 | — |
| 1017604 | 1-1/8 | 15 | 1.25 | 1.81 | 7.30 | 1083867 |
| 1017626 | 1-1/4 | 18 | 1.41 | 2.03 | 9.88 | 1083873 |
| 1017648 | 1-3/8 | 21 | 1.56 | 2.25 | 13.25 | 1083885 |
4.5:1 design factor. Maximum proof load is two times the Working Load Limit in metric tons and 2.2 times the Working Load Limit in short tons. Working Load Limits may be reduced when shackles are subjected to side loading. Always follow the applicable manufacturer warnings and application instructions.
Contact the Bishop Lifting team for help selecting the correct Crosby G-209A alloy screw pin anchor shackle, size or replacement screw pin for your lifting and rigging application. Our rigging specialists can also assist with proof testing, certifications and selecting the right shackle for your Working Load Limit requirements.
| MPN | 1017626 |
|---|---|
| Model | G-209A |
| Size | 1-1/4" |
| Product Type | Screw Pin Anchor |
| Material | Alloy Steel |
| WLL (tons) | 18 |
| WLL (lbs) | 39600 |
| Safety Factor | 4.5:1 |
Reviews
There are no reviews yet.