ADB Nickel-Plated Swivel Hoist Rings for Corrosion-Resistant Lifting ADB nickel-plated swivel hoist rings provide a strong, versatile lifting point for applications where load direction may change and additional corrosion resistance is desired. Forged from high-strength 4140 alloy steel and protected with an electroless nickel-plated finish, these heavy-duty hoist rings are available in UNC thread
$ 137.990
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
ADB nickel-plated swivel hoist rings provide a strong, versatile lifting point for applications where load direction may change and additional corrosion resistance is desired. Forged from high-strength 4140 alloy steel and protected with an electroless nickel-plated finish, these heavy-duty hoist rings are available in UNC thread sizes with rated loads from 550 to 30,000 lbs.
Unlike conventional eye bolts, ADB swivel hoist rings are designed to swivel 360° and pivot 180°, allowing the lifting bail to align with the direction of the applied load. ADB specifies that its swivel hoist rings maintain full rated capacity from 0° through 90° from the bolt axis, subject to the rated capacity and application requirements of the selected model.
ADB nickel-plated swivel hoist rings are designed for use as load-rated lifting and attachment points on machinery, fixtures, dies, molds, fabricated assemblies and other equipment. Their ability to swivel and pivot with the direction of loading makes them especially useful where a fixed lifting eye may be subjected to angular loading. The corrosion-resistant nickel-plated finish also provides additional protection in environments where an unplated lifting point may be less desirable.
The electroless nickel plating meets AMS-C-26074 Class 1 Grade B. Each ADB hoist ring is individually serialized and can be disassembled and reassembled for inspection. Standard UNC models are offered with thread sizes ranging from 1/4″-20 through 2″-4-1/2, providing options for a wide range of lifting capacities and mounting requirements.
| Part Number | Rated Load (lbs) | Thread Size | A (in) | B (in) | C (in) | D (in) | E (in) | F (in) | Torque (ft-lbs) | Weight (lb) |
|---|---|---|---|---|---|---|---|---|---|---|
| EN33112 | 550 | 1/4″-20 | 0.65 | 2.29 | 0.96 | 0.44 | 0.56 | 3.23 | 5 | 0.50 |
| EN33212 | 800 | 5/16″-18 | 0.65 | 2.29 | 0.96 | 0.44 | 0.56 | 3.23 | 7 | 0.52 |
| EN33312 | 1,000 | 3/8″-16 | 0.65 | 2.29 | 0.96 | 0.44 | 0.56 | 3.23 | 12 | 0.56 |
| EN33316 | 2,250 | 1/2″-13 | 0.65 | 2.29 | 0.96 | 0.44 | 1.06 | 3.23 | 26 | 0.60 |
| EN33512 | 2,500 | 1/2″-13 | 1.00 | 3.50 | 1.50 | 0.75 | 0.75 | 5.31 | 28 | 1.71 |
| EN33516 | 2,500 | 1/2″-13 | 1.00 | 3.50 | 1.50 | 0.75 | 1.25 | 5.31 | 28 | 1.82 |
| EN33614 | 4,000 | 5/8″-11 | 1.00 | 3.50 | 1.50 | 0.75 | 1.00 | 5.31 | 60 | 1.78 |
| EN33714 | 5,000 | 3/4″-10 | 1.00 | 3.50 | 1.50 | 0.75 | 1.00 | 5.31 | 100 | 1.89 |
| EN33716 | 5,000 | 3/4″-10 | 1.00 | 3.50 | 1.50 | 0.75 | 1.50 | 5.31 | 100 | 2.02 |
| EN33102* | 7,000 | 3/4″-10 | 1.50 | 5.10 | 2.05 | 1.00 | 1.20 | 7.37 | 100 | 7.23 |
| EN33104 | 8,000 | 7/8″-9 | 1.50 | 5.10 | 2.05 | 1.00 | 0.95 | 7.37 | 160 | 7.33 |
| EN33105 | 10,000 | 1″-8 | 1.50 | 5.10 | 2.05 | 1.00 | 1.45 | 7.37 | 230 | 7.57 |
| EN33402 | 15,000 | 1-1/4″-7 | 2.00 | 6.75 | 2.87 | 1.25 | 1.88 | 9.22 | 470 | 15.74 |
| EN33424 | 24,000 | 1-1/2″-6 | 2.00 | 6.75 | 2.87 | 1.25 | 2.63 | 9.22 | 800 | 18.10 |
| EN33427†| 30,000 | 2″-4-1/2 | 2.00 | 6.75 | 2.87 | 1.25 | 2.96 | 9.22 | 1,100 | 22.90 |
Yes. ADB swivel hoist rings are designed to swivel 360° and pivot 180°, allowing the bail to align with the direction of loading. Unlike conventional eye bolts, ADB states that these swivel hoist rings maintain full rated capacity from 0° through 90° from the bolt axis, subject to the manufacturer’s application requirements and the rated load of the selected hoist ring.
ADB nickel-plated swivel hoist rings are forged from high-strength 4140 alloy steel and feature corrosion-resistant electroless nickel plating meeting AMS-C-26074 Class 1 Grade B.
Yes. ADB specifies that these hoist rings are 200% proof load tested and individually serialized for identification and traceability.
These UNC ADB nickel-plated swivel hoist rings are available in rated loads ranging from 550 lbs. to 30,000 lbs. Select the appropriate model based on the required rated load, thread size and mounting requirements.
Yes. ADB specifies that these swivel hoist rings comply with ASME B30.26.
Need help selecting the correct ADB nickel-plated swivel hoist ring? Our lifting specialists can help you determine the appropriate rated capacity, UNC thread size and configuration for your lifting application.
| MPN | EN33714 |
|---|---|
| Size | 3/4"-10 |
| Product Type | Standard |
| Finish | Nickel-Plated |
| WLL (lbs) | 5000 |
| Safety Factor | 5:1 |
| Overhead Lifting Rated | Yes |
| Overall Width | 3.5" |
Reviews
There are no reviews yet.