Working Load Limit and Grade 6 permanently shown on every shackle Forged, Quenched & Tempered, with alloy pins Hot-dip galvanized (G) 85 ton shackles have hot-dip galvanized bows and the bolts are Dimetcoted® and painted red Sizes 3/8″ and below are mechanically galvanized Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit (1/2t – 55t) Shackles 25t and larger are RFID equipped Ap
$ 170.200
Although Bishop Lifting strives to manufacture and sell the highest quality rigging and safety gear, use of the gear is dangerous if not used correctly by competent trained professionals. Bishop Lifting disclaims any liability resulting from the misuse of its rigging and safety gear. Please take a moment to more thoroughly review our disclaimer.
Bishop Lifting rigging and safety gear is only intended to be used by competent trained professionals. Misuse of the rigging and safety gear can result in serious injury up to and including loss of life. As such, Bishop Lifting disclaims liability for any misuse or incorrect product selection by our customers.
Rigging and safety gear purchased from Bishop Lifting should be used in strict accordance with all industry and OSHA standards. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear; therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used.
| MPN | 1019855 |
|---|---|
| Model | G-2150 |
| Size | 1" |
| Product Type | Bolt Type Chain |
| Material | Carbon Steel |
| WLL (tons) | 8.5 |
| WLL (lbs) | 18700 |
| Safety Factor | 6:1 |
Reviews
There are no reviews yet.